Kohler CH270-3038 Horizontal Command PRO Engine, 2:1 Gear Reduction with Clutch for SALE
$ 760,10
Brand: Kohler EnginesBuy the Kohler CH270-3038 Horizontal Command PRO Engine, 2:1 Gear Reduction with Clutch with 2:1 gear reduction, wet clutch, electric start and a 10A charging system.
Kohler CH270-3038 Horizontal Command PRO Engine, 2:1 Gear Reduction with Clutch
The Kohler CH270-3038 Command PRO is a commercial-grade horizontal engine equipped with an integrated 2:1 gear-reduction system and wet centrifugal clutch. This configuration reduces output-shaft speed to approximately half the engine speed while increasing usable torque, making it suitable for go-karts, tillers, compactors, conveyors, construction equipment, and other low-speed drive applications.
Key Features
- Integrated 2:1 gear reduction
- Automatic wet centrifugal clutch
- Reduced output speed with increased usable torque
- 208cc single-cylinder OHV engine
- 7 gross horsepower
- 10.5 lb-ft maximum engine torque
- 12-volt electric start
- Recoil backup starter
- Regulated 10-amp charging system
- Metric keyed output shaft
- Quad-Clean four-stage air cleaner
- Cast-iron cylinder liner
- Oil Sentry low-oil shutdown
- Included fuel tank and muffler
Specifications
| Specification | Details |
|---|---|
| Brand | Kohler / Rehlko |
| Model | CH270-3038 |
| Manufacturer part number | PA-CH270-3038 |
| UPC | 885612197672 |
| Engine series | Command PRO |
| Engine type | Four-stroke OHV gasoline |
| Number of cylinders | One |
| Mounting orientation | Horizontal |
| Displacement | 208cc / 12.7 cu. in. |
| Gross power | 7 HP |
| Maximum engine torque | 10.5 lb-ft / 14.2 Nm |
| Bore × stroke | 70 × 54 mm / 2.8 × 2.1 in. |
| Compression ratio | 8.5:1 |
| Gear-reduction ratio | 2:1 |
| Clutch type | Automatic wet centrifugal clutch |
| Output speed | Half engine speed |
| Approximate output at 3,600 engine RPM | 1,800 RPM |
| Starting system | 12V electric and recoil start |
| Charging system | Regulated 10 amp |
| Ignition system | Electronic |
| Governor | Mechanical |
| Cooling system | Forced air |
| Engine lubrication | Splash |
| Engine-oil capacity | 0.63 US qt. / 0.60 L |
| Recommended engine oil | SAE 10W-30 |
| Gearbox lubrication | Separate oil supply |
| Gearbox-oil capacity | 0.52 US qt. / 0.50 L |
| Recommended gearbox oil | SAE 20W-40 or 20W-50 |
| Fuel type | Unleaded gasoline |
| Fuel-tank capacity | Approximately 4.2 US qt. / 4.0 L |
| Output-shaft diameter | 22 mm |
| Output-shaft length | Approximately 2 in. / 52.5 mm |
| Shaft type | Metric keyed shaft |
| Shaft-end thread | Drilled and tapped, typically M8 × 1.25 |
| Low-oil protection | Oil Sentry shutdown |
| Air-cleaner type | Quad-Clean four-stage cyclonic |
| Muffler | Included |
| Approximate shipping weight | 66.9 lb. |
| Limited warranty | Three years |
Reviews
There are no reviews yet.