Take 30% off when you spend $120    Custom link

Kohler CH620-3149 Horizontal Command PRO Engine, Replaces CH620-3130

The Kohler CH620-3149 Command PRO Horizontal Engine is a commercial replacement engine designed for select Moridge zero-turn mower applications. This E3 specification replaces Kohler CH620-3130 and may also supersede CH620-3080 and CH18S-62621, subject to complete configuration verification.

Key Features

  • Commercial-duty Kohler Command PRO engine
  • E3 Moridge zero-turn mower specification
  • Replaces Kohler CH620-3130
  • Additional cross-references: CH620-3080 and CH18S-62621
  • 674cc four-cycle V-twin OHV design
  • 19 gross horsepower
  • Approximately 35 ft-lb of peak torque
  • 12-volt electric starter
  • 15-amp charging system
  • Full-pressure lubrication
  • Full-flow spin-on oil filter
  • Cast-iron cylinder liners
  • Flat-profile air cleaner
  • Mechanical fuel pump
  • Center-exit muffler included
  • Large 1-1/8-inch keyed PTO shaft

Specifications

Specification Details
Brand Kohler
Series Command PRO
Engine model CH620
Specification number CH620-3149
Manufacturer part number PA-CH620-3149
Replaces CH620-3130
Additional cross-references CH620-3080, CH18S-62621, PA-62621
OEM specification E3 Moridge ZTR
Engine orientation Horizontal shaft
Engine configuration V-twin
Engine cycle Four-cycle
Valve configuration OHV
Displacement 674cc / 41.1 cu. in.
Gross power 19 HP / 14.2 kW
Rated speed 3,600 RPM
Peak torque Approximately 35 ft-lb / 47.5 Nm
Peak torque speed Approximately 2,200 RPM
Bore 3.15 in. / 80 mm
Stroke 2.64 in. / 67 mm
Compression ratio 8.5:1
Cooling system Forced air
Fuel type Unleaded gasoline
Fuel system Carbureted
Fuel pump Mechanical fuel pump included
Starting system 12V electric start
Charging system 15 amp
Ignition system Electronic
Governor Mechanical
Lubrication system Full pressure
Oil filter Full-flow spin-on filter
Oil capacity Approximately 2 US qt. / 1.9 L
Air cleaner Flat-profile air cleaner
PTO shaft type Straight, keyed shaft
PTO shaft diameter 1-1/8 in.
PTO shaft length Approximately 3.35 in. / 3-11/32 in.
Keyway 1/4 in. wide × approximately 0.13 in. deep
Crankshaft end 7/16-20 tapped
PTO rotation Counterclockwise when viewed from PTO side
Muffler Center-exit muffler included
Muffler part reference 24 786 23-S
Fuel tank Not included
Approximate dimensions 14 × 17.7 × 19 in.
Approximate configured weight 117 lb
UPC/GTIN 885612768780
Warranty Manufacturer’s limited engine warranty

Reviews

There are no reviews yet.

Be the first to review “Kohler CH620-3149 Horizontal Command PRO Engine, Replaces CH620-3130 for SALE”

Your email address will not be published. Required fields are marked