Take 30% off when you spend $120    Custom link

Kohler CH620-3192 Horizontal Command PRO Engine, Replaces CH620-3157

The Kohler CH620-3192 Horizontal Command PRO Engine provides commercial-grade power for compatible mowers, generators, pumps, chippers, and other industrial equipment. It supersedes the CH620-3157 and is also identified as a replacement for selected CH620-3103, CH620-3002, and CH18S-62500 applications.

Key Features

  • Commercial-grade Command PRO design
  • 674cc V-twin gasoline engine
  • 19 HP power output
  • Maximum torque of 35 ft-lb
  • Horizontal 1-1/8-inch by 4-inch crankshaft
  • 12-volt electric starter
  • 15-amp charging system
  • Full-pressure lubrication
  • Replaceable full-flow oil filter
  • Dual-element air cleaner
  • Cast-iron cylinder liners
  • Electronic ignition
  • Fuel pump included
  • Basic configuration without a control panel
  • Replaces Kohler CH620-3157

Specifications

Specification Details
Brand Kohler
Series Command PRO
Model CH620
Specification number CH620-3192
Manufacturer part number PA-CH620-3192
Primary replacement CH620-3157
Additional cross-references CH620-3103, CH620-3002 and CH18S-62500
Configuration E16 Basic, no control panel
Engine classification Commercial
Engine type Four-cycle, V-twin, OHV
Crankshaft orientation Horizontal
Displacement 674cc / 41.1 cu. in.
Power output 19 HP / 14.2 kW
Maximum torque 35 ft-lb / 47.5 Nm at 2,200 RPM
Maximum speed 3,600 RPM
Bore 3.15 in. / 80 mm
Stroke 2.64 in. / 67 mm
Compression ratio 8.5:1
Cooling system Forced-air cooled
Fuel type Unleaded gasoline, 87 octane
Fuel system Carbureted with fuel pump
Starting system 12-volt electric starter
Charging system 15 amp
Ignition system Electronic
Governor Variable-speed mechanical governor
Lubrication system Full-pressure lubrication
Oil filter Replaceable full-flow filter
Oil capacity 2.0 US qt. / 1.9 L
Low-oil protection Low-oil alert and shutdown
Air cleaner Dual-element
Throttle control Remote
Choke control Remote
Crankshaft type Straight, keyed and hardened
Crankshaft diameter 1-1/8 in. / 28.57 mm
Crankshaft length 4 in. / 101.6 mm
Keyway 1/4 in.
Internal shaft thread 7/16-20, drilled and tapped
PTO rotation Counterclockwise when viewed from the PTO side
Control panel included No
Fuel tank included No
Muffler included No
Approximate dimensions 14 × 17.7 × 19 in.
Approximate dry weight 90 lb
Warranty 3-year manufacturer limited warranty

Reviews

There are no reviews yet.

Be the first to review “Kohler CH620-3192 Horizontal Command PRO Engine, Replaces CH620-3157 for SALE”

Your email address will not be published. Required fields are marked