Kohler CH440-3038 Hori fozontal Command PRO Engine, 2:1 Gear Reduction with Clutch for SALE
$ 1.072,50
Brand: Kohler EnginesBuy the Kohler CH440-3038 Hori fozontal Command PRO Engine, 2:1 Gear Reduction with Clutch with a 2:1 reduction gearbox, wet clutch, electric start and 22mm output shaft.
Kohler CH440-3038 Hori fozontal Command PRO Engine, 2:1 Gear Reduction with Clutch
The Kohler CH440-3038 Command PRO is a commercial-grade horizontal engine equipped with an integrated 2:1 reduction gearbox and wet centrifugal clutch. Its 429cc four-stroke OHV design delivers 14 gross horsepower and 22.7 lb-ft of peak torque, providing dependable power for tillers, utility vehicles, industrial machinery, agricultural equipment, and other applications requiring reduced output speed.
Key Features
- Commercial-grade 429cc OHV engine
- 14 gross horsepower
- 22.7 lb-ft maximum torque
- Integrated 2:1 reduction gearbox
- Wet centrifugal clutch
- 22mm keyed output shaft
- Electric and recoil starting
- 10-amp charging system
- Quad-Clean four-stage air cleaner
- Oil Sentry low-oil protection
- Forged-steel crankshaft
- Cast-iron cylinder liner
- Large-capacity fuel tank
- Muffler and heat shield included
- Three-year limited manufacturer warranty
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Kohler / Rehlko |
| Product series | Command PRO |
| Model | CH440-3038 |
| Manufacturer part number | PA-CH440-3038 |
| Engine specification | E09 Basic 2:1 |
| Engine type | Four-stroke OHV, single-cylinder |
| Shaft orientation | Horizontal |
| Displacement | 429cc (24.7 cu. in.) |
| Gross power | 14 HP (10.5 kW) at 3,600 rpm |
| Certified power | Approximately 13.4 HP (10 kW) at 3,600 rpm |
| Maximum torque | 22.7 lb-ft (30.8 Nm) |
| Bore × stroke | 3.5″ × 2.7″ (89 × 69 mm) |
| Compression ratio | 8.0:1 |
| Maximum governed speed | Approximately 3,750 rpm |
| Cooling system | Forced-air |
| Ignition system | Electronic |
| Governor | Mechanical, variable speed |
| Starting system | 12V electric and recoil |
| Charging system | 10 amp |
| Gear-reduction ratio | 2:1 |
| Gearbox drive | Chain and sprocket |
| Clutch type | Wet centrifugal clutch |
| Output speed | Approximately half engine speed |
| Full clutch engagement | Approximately 2,400 engine rpm or higher under load |
| Output shaft type | Straight and keyed |
| Output shaft diameter | 22mm |
| Keyway | Approximately 7mm wide × 34mm long |
| Shaft-end thread | M8 × 1.25 |
| PTO mounting face | Approximately 53mm |
| Output rotation | Counterclockwise viewed from output end |
| Air cleaner | Quad-Clean four-stage cyclonic |
| Engine lubrication | Splash |
| Engine oil capacity | 1.4 US qt (1.3 L) |
| Recommended engine oil | SAE 10W-30 |
| Gearbox lubrication | Separate from engine crankcase |
| Gearbox oil type | SAE 20W-40 or 20W-50 |
| Gearbox oil capacity | 0.52 US qt (0.5 L) |
| Gearbox oil interval | Every 50 operating hours |
| Low-oil protection | Oil Sentry |
| Fuel | Unleaded gasoline |
| Fuel tank capacity | Approximately 7.4 US qt (7.0 L) |
| Fuel shutoff valve | Included |
| Controls | Manual throttle and choke |
| Muffler | Included |
| Listed shipping weight | Approximately 108 lb |
| Warranty | Three-year limited manufacturer warranty |
| Suggested successor | CH440-3278; verify configuration before substitution |
Reviews
There are no reviews yet.