Take 30% off when you spend $120    Custom link

Kohler KT735-3076 Vertical 7000 Series Engine, E16 MTD Spec

The Kohler KT735-3076 7000 Series Vertical Engine is a residential-grade V-twin engine designed specifically for select MTD-manufactured riding mowers and lawn tractors. Its E16 MTD configuration may be found on certain Cub Cadet, Troy-Bilt, Craftsman, and other MTD-built equipment, although compatibility must be confirmed using the original engine specification number.

Key Features

  • Kohler 7000 Series V-twin engine
  • E16 MTD equipment specification
  • Designed for select MTD-built riding mowers
  • 725cc four-cycle OHV configuration
  • Maximum output of 24 horsepower
  • Approximately 40.5 ft-lb of torque
  • Bendix-drive electric starter
  • 15-amp charging system
  • Pressure lubrication
  • Full-flow spin-on oil filter
  • Cast-iron cylinder liners
  • Low-profile air cleaner
  • Mechanical fuel pump
  • Electronic ignition
  • One-inch keyed vertical PTO shaft

Specifications

Specification Details
Brand Kohler
Series 7000 Series
Engine model KT735
Specification number KT735-3076
Manufacturer part number PA-KT735-3076
OEM specification E16 MTD
Intended application Select MTD-built riding mowers and lawn tractors
Engine orientation Vertical shaft
Engine configuration V-twin
Engine cycle Four-cycle
Valve configuration OHV
Engine block Aluminum with cast-iron cylinder liners
Displacement 725cc / 44.2 cu. in.
Maximum power 24 HP / 17.9 kW
Rated speed Approximately 3,600 RPM
Maximum torque 40.5 ft-lb / 54.9 Nm
Maximum torque speed Approximately 2,400 RPM
Bore 3.27 in. / 83 mm
Stroke 2.64 in. / 67 mm
Compression ratio 9.1:1
Cooling system Forced air
Fuel type Unleaded gasoline
Fuel system Carbureted
Fuel pump Mechanical fuel pump included
Starting system 12V Bendix-drive electric start
Charging system 15 amp
Ignition system Electronic
Governor Mechanical
Lubrication system Pressure lubrication
Oil filter Full-flow spin-on filter
Oil capacity Approximately 2 US qt. / 1.9 L
Air cleaner Low-profile air cleaner
PTO shaft type Straight, keyed shaft
PTO shaft diameter 1 in.
PTO shaft length Approximately 3.16 in. / 3-5/32 in.
Keyway width 1/4 in.
Crankshaft end 7/16-20 tapped
PTO rotation Counterclockwise when viewed from PTO side
Fuel tank Equipment-mounted; not included with engine
Muffler Verify with seller; equipment-specific configuration
Approximate dimensions 18.6 × 17.5 × 13.9 in.
Approximate dry weight 85 lb
Warranty Three-year limited residential warranty; other-use terms may differ

Reviews

There are no reviews yet.

Be the first to review “Kohler KT735-3076 Vertical 7000 Series Engine, E16 MTD Spec for SALE”

Your email address will not be published. Required fields are marked